Barn Doors, Donuts, Top Hats

  • Blizzard HOTBOX Barndoors

    Blizzard Lighting HOTBOX Barndoors

    Blizzard Lighting BARNDOOR-HOTBOX  Barndoor for Blizzard Hotbox Barndoor attachment for HotBox series par fixtures. The Blizzard Barn Doors are intended for the HotBox series and this attachment fits any HotBox series par fixtures. This unit...

    $29.99
    Add to Cart
  • CDASHP18BARNDOOR CDASHP18BARNDOOR

    Chauvet Pro COLORdash Par-18 Barn Doors

    COLORdash Par-18 Barn Doors Block excess light from the stage and other architectural elements for the COLORdash Par-Quad 18 with this barn door and gel frame holder. AT A GLANCE Shields excess light from stage and architectural...

    $46.62
    Add to Cart
  • CDASHP7BARNDOOR

    Chauvet Pro COLORdash Par-7 Barn Doors

    COLORdash Par-7 Barn Doors Direct or focus the light beam for the COLORdash Par-Quad 7 with this barn door and gel frame holder. AT A GLANCE Shields excess light from stage and architectural elements Barn doors for use with...

    $31.58
    Add to Cart
  • etc 400dn

    ETC 6.25 inch donut

    ETC 6.25 inch donut Reduces flare in template projections. Fits 19º-50º ETC Source Four & ETC Source Four Jr. 6.25". Color Option:  black or white.  Please specify color at time of order. Model #400DN Part #7060A1015  

  • etc 407dn

    ETC 7.5 inch donut

    ETC 7.5 inch donut The ETC 407DN is a 7.5" donut for use with ellipsoidal fixtures that reduces flare in template projections. Color Option:  black or white.  Please specify color at time of order. Model #407DN Part #7060A1016  

  • etc 410dn

    ETC Donut for 10 degree unit

    ETC Donut for 10 degree unit This accessory is a donut with a black, white, or silver finish for 10° Source Four fixtures. It is designed to reduce flare in template projections and measures 12"x12" with a 6" diameter opening in the center...

  • etc 405dn

    ETC Donut for 5 degree unit

    ETC Donut for 5 degree unit The 405DN Donut for ETC Source 4 5 degree Ellipsoidals reduces glare when using projection templates (gobos) in the fixture. The donut's outer dimensions measure 14 x 14" with a 7" diameter center opening...

  • ETC Egg Crate Louver

    ETC Egg Crate Louver

    ETC Egg Crate Louver Egg Crate Louver for Soure Four PAR and Source Four PARnel Fixtures. This accessory, the 400L from ETC is an Egg Crate Louver that is commonly used to control spill light. Model #: 400L Part #: PSF1028

  • ETC 400HH

    ETC Half Hat

    ETC Half Hat Half hat to reduce light spill and glare. Fits 19° - 50° Source Four and Source Four Jr. units. This Source Four accessory is a Half Hat that measures 7x7x6 inches. Like the Top Hat this unit helps to control and reduce flare but...

  • ETC 400PHH-1

    ETC Half Hat 6” tube , white

    ETC Half Hat 6” tube, white in color. ETC Half Hat for Source 4 PAR   The Half Hat for the ETC Source Four PAR acts as a snoot in limiting only one side of the spread or flare of the beam emitted from the fixture...

    $35.50
    Add to Cart
  • etc 400phh

    ETC Half Hat 6” tube, black

    ETC Half Hat 6” tube, black in color. ETC Half Hat for Source 4 PAR   The Half Hat for the ETC Source Four PAR acts as a snoot in limiting only one side of the spread or flare of the beam emitted from the fixture...

    $25.00
    Add to Cart
  • ETC Source Four LED CYC Barndoor

    ETC Source Four LED CYC Barndoor ETC Source Four LED CYC Barn Door for use with Source Four LED CYC Lens and Source Four fixtures. *Barn door creates sharp bottom edge and controls glare on top Model#S4LEDCYCBD Part #7460A2014

    $60.00
    Add to Cart
  • ETC Top Hat

    ETC Top Hat ETC Top Hat For 19º-50º Source Four & Source Four Jr (PSF1021) Top hat to reduce light spill and glare. Fits 19° - 50° Source Four and Source Four Jr. units. 5" x 5" x 6". This accessory is a Top Hat with a 5" tube...

  • ETC Top Hat 3 inch tube etc 400PTH3

    ETC Top Hat 3 inch tube

    ETC Top Hat 3 inch tube This Source Four PAR accessory is a Top Hat 3" tube that is black in color and is intended to reduce light flare. Unit is compatible with a variety of Source Four fixtures. Available in black and white.  Please select...

  • etc 400PTH6

    ETC Top Hat for 14º unit

    ETC Top Hat for 14º unit Top hat to reduce light spill and glare. Fits 14° units. The 6" Top Hat for ETC Source 4 PAR acts as a snoot in limiting the spread or flare of the beam emitted from the fixture. The tube length...

  • etc 405th

    ETC Top Hat for 5º unit

    ETC Top Hat for 5º unit Top hat to reduce light spill and glare. Fits 5° units. Available in black, white, or silver.  Please select color at time of order. Model #405TH Part #PSF1025