Blizzard Lighting OBERON PROFILE WZ ellipsoidal imaging spotlight (BLACK)
Oberon™ profile ellipsoidal imaging spotlights produce high intensity sharp or soft edged beams that are perfect for theatre, studio applications, nightclubs, museums, or anywhere that precisely controlled accent spotlighting is needed.
• Oberon™ Profile NZ (narrow zoom, 15-28 degree)
• Oberon™ Profile WZ (wide zoom, 20-45 degree)
Both of these incredible fixtures are equipped with a 200W high-intensity 3200K tungsten COB LED, and offer an incredible CRI of 95. The light quality is comparable to natural sunlight and incandescent lighting, while consuming much less energy. They provide rich and accurate color rendition, natural skin tones, and can deliver brightness with ease!
Users can manually zoom and focus the fixtures via two locking adjustment knobs located on the side of the housing. One knob controls the zoom/beam angle, and the other controls the focus. When the knobs are loosened, they easily slide back and forth to allow for a smaller or larger spot, with either a soft or sharp, finely focused edge.
Both models come equipped with a stainless-steel shutter blade assembly, an attachable color gel frame, gobo holder, and can be used in standalone or master/slave mode with multiple units using simple 1-channel DMX mode, or 2-channel DMX mode with master dimming and built-in strobe effects (1-20 fps).
They have an easy-to-use 4-button LCD menu that offers quick access to DMX address and master/slave settings, 0-100% manual dimming, demo mode (off/on/strobe), and fixture reset. They are also equipped with 3/5-pin DMX In/Out jacks, and PowerCon ™ compatible AC power In/Out connectors which allow users to safely power link up to 5 fixtures.
Oberon™ Profile NZ and WZ fixtures are both cETL listed, covered by Blizzard’s 2-year limited warranty, and available in your choice of either black or white housing!
Voltage: 100-240VAC, 50-60 Hertz
Power Consumption: 234W, 2.2A, PF: .98
1x 200W Tungsten 3200K COB LED, 50,000 hours
15-28 degree zoom (Profile NZ), 20-45 degree zoom (Profile WZ)
Luminous Flux: 17,000lm/18,000lm, CRI: 95Ra
Gobo Size: 86mm, image size 64.5mm
Max. Operating Temp.: 104 degrees F (40 degrees C) ambient
Cooling System: Heat pipe with no fan noise
USITT DMX-512, 1 or 2-channel DMX
4-button LCD control panel
Input: 3/5-pin XLR Male, Output: 3/5-pin XLR Female
Standalone, Master/Slave Mode
Profile NZ: 29.3 x 10.9 x 10.9 in (745 x 277 x 276 mm)
Profile WZ: 25.4 x 10.9 x 10.9 in (645 x 277 x 276 mm)
Profile NZ: 22.5lbs (10.2kg), Profile WZ: 20.3lbs (9.2 kg)
Blizzard Lighting, LLC hereby warrants that its products shall be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period below). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. This warranty shall be valid only if the product is purchased from an authorized dealer appointed by Blizzard Lighting, LLC. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence.
For warranty service you must obtain a Return Merchandise Authorization number (RMA#) before sending back the product. Contact Blizzard Lighting, LLC’s Service Department at www.blizzardlighting.com/support to open a support ticket. Send the product only to the Blizzard Lighting, LLC factory. All shipping charges must be prepaid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, Blizzard Lighting, LLC will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with the product. If any accessories are shipped with the product, Blizzard Lighting, LLC shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof.
This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which Blizzard Lighting, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the Blizzard Lighting, LLC factory unless prior written authorization was issued to purchaser by Blizzard Lighting, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.
This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the period specified above, Blizzard Lighting, LLC will replace defective parts at its expense with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of Blizzard Lighting, LLC under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of Blizzard Lighting.
Blizzard Lighting, LLC reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured.
No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by Blizzard Lighting, LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall Blizzard Lighting, LLC be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.
This warranty is the only written warranty applicable to Blizzard Lighting Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.
LIMITED WARRANTY PERIODS:
• All LED Products: 2 years (Including motors, PCB boards, power supplies, driver boards and wiring, does not include damage to LEDs or any of the for-mentioned parts caused by mishandling.)
• All Batteries have a 1-year limited warranty.
• All Fog/Atmospheric Products: 1 year
• All Controller Products: 2 years
• Laser Products: 2 years
• B-Stock Products: 1 year
• Recertified Products: 90 days
• Other Products not listed here: 90 days